Jackarod

Description

Tired of endless cranking to stabilize or level your trailer?  Convert a standard RAM tongue jack to a hex drive with the Jackarod and use a drill motor to raise and lower the stabilizer.

CNC machined from 304 Stainless, TIG welded and laser etched, this part will probably last longer than the jack.  3/4″ hex drive can be driven with any drill or impact with a standard 3/4″ or 19mm socket.  A manual crank handle is available in case your battery dies, LOL!  Or you can use a 4-way lugnut wrench (most have a 3/4″/19mm end).

Installation requires a 10mm wrench, small pick, 3/16″ drift punch and a small hammer.  Takes about 10 minutes per jack to install, great time to re-grease the bevel gear in the jack head.

Includes one Jackarod drive shaft and installation instructions.  Manual crank handle sold separately.