So-Cal Teardops Decal

Description

So-Cal Teardrops Logo Decal – UV DTF Decals – 10.5″ x 5″ – sold per each

How to apply decal:

Step 1: Prepare the surface

• Clean the surface thoroughly with isopropyl alcohol or Windex to remove any dust, grease, or moisture.
• Allow the surface to dry completely.

Step 2: Position, align and apply

• Add a strip of masking tape to top edge, line up the decal on prepared surface, tape will hold decal in place while you peel the backing from the sticker, design to remain on the carrier sheet.
• For large designs, hold the sticker from one side and work your way across to avoid trapping air bubbles.
• Use a squeegee, credit card, or your fingers to press the sticker down, starting from the center and moving outwards.

Step 3: Secure and finish

• Apply firm and even pressure across the entire design with your squeegee to ensure good adhesion.
• Slowly peel off the clear transfer sheet at an angle, making sure the design remains adhered to the surface.
• If any part lifts, place the clear sheet back down, burnish the area again, and continue peeling from a different angle.